HCK Spectratest Iron High

Measurement of the color intensity of the orange complex formed by the reaction of the Iron, previously reduced, with 1,10-phenanthroline.

0,5 -10 ppm Fe

400

Determination of bivalent and trivalent iron dissolved in water. This is the determination of total iron dissolved in water, meaning that non-dissolved iron, present for example in the form of rust flakes, is not determined unless it has first been dissolved by boiling with acid.

Purified, waste and thermal circuits.

Package contents:
• 4 bottles of 25 ml of reagent A
• 2 plastic test tubes of 20 ml with stopper
• 2 test tubes of 16 mm optical glass with stopper
• 1 syringe of 5 ml
• Instructions (English)

- This classic method is widely used in all cases where a particularly high sensitivity is not required, for which the iron low method is recommended.
- HYDROCHECK SPECTRATEST kits (which can be purchased directly) require the use of a photometer, such as the HC6000, and allow a large number of precise analyses to be carried out at a very low cost.
HYDROCHECK MONOTEST kits are preferred for their convenience and safety of use. The cost per analysis of the MONOTEST kits is higher, but the analysis is simpler, as the samples to be analysed are placed in optical glass tubes containing the pre-dosed reagents and used directly in the appropriate photometers. MONOTEST kits are especially recommended when there are only a few analyses to be performed.
As far as the photometer is concerned, it is preferable to use a spectrophotometer such as the Hydrocheck or Spectronic Genesys, as filter photometers give less reliable and accurate results and always require the construction of a calibration curve.

Replacement spectratest iron high (Code No. 6435) containing:
- 12 vials of reagent Iron A
- 10 20 ml tubes (Code N° 3310)
- 24 round 16 mm optical glass tubes (Code No. 7132)