HCK Monotest Sulphates

Turbidimetric

15 – 200 ppm SO4

15 – 200 ppm SO4

• 20 optical glass tubes with pre-dosed reagent
• 1 bottle with 3g of M/1 reagent
• 1 teaspoon No. 2
• 1 optical glass tube containing the white
• 20 adhesives for test tubes
• instructions (English)

- HYDROCHECK MONOTEST kits (which can be purchased directly) require the use of a photometer. Despite having a higher cost per analysis than that offered by SPECTRATESTs, MONOTESTs are finding increasingly widespread use because of their high accuracy, reliability and safety of use.
In addition, with the MONOTESTs, analysis is simpler because the samples to be analyzed are introduced into optical glass tubes containing the predosed reagents that can be used directly in any photometer capable of accepting 16-mm diameter round tubes, such as Hydrocheck or Spectronic Genesys spectrophotometers.
SPECTRATEST kits, which offer a significantly lower cost per analysis, are recommended when it is necessary to perform many analyses, to be repeated frequently.
As for the photometer, it is preferable to use a spectrophotometer such as the Hydrocheck or Spectronic Genesys, since filter photometers give less reliable and accurate results, as well as always requiring the construction of a calibration curve.
- Determination of sulfates using simple kits is only possible with MONOTESTs, in tubes with pre-dosed reagent.

- 10 20cc test tube (Code No. 3310)
- 24 16 mm round optical glass cuvettes (Code No 7132)